CD Players

Here are ten things that will help you if your CD changer will play or not, since save.

1) Before installing a CD changer to make sure that the screws removed from the transport (if available). It will be very visible on the outside of the CD Changer.

2) Make sure the angle adjustment screw assembly found on both sides of the CD changer was set properly according to the angle at which the CD changer attached. Consultmanual for more information.

3) Check that the disks are clean and undamaged. Try different CDs in the path of the disc will not play. For example, the CD changer is not game (disc 1) CD test whether a second CD (preferably a native) in slot No. 1. This is especially true if you have a CD-R or CD / RW copied CDs like this are often the culprits as an inexpensive CD-R is used. The other reason is if it is burned invery quickly, or if the copier did not complete disc completely.

4) If you have a CD changer with Velcro for you, so make sure you have mounted horizontally. It 'true that a larger contact surface to provide maximum stability to recommend Prevent new CD. CD changer with the supplied brackets manufacturers, but we never have problems with Velcro if you cd changer mountain to ensure that it is horizontalis massive.

5) Use a CD cleaner disc laser. It 'available at any music store and then play in your CD changer will be laser clear and drag correct any problems in a dirty laser disc CD, how to play o.

6) If the Exchange magazine is published, then the CD changer, so there would be no problem. So now remove the CD changer data cable from the CD changer and have fun in a minute, thenreconnect and verify proper operation. This normally insert your CD changer.

7) If you have a CD changer that a safety line as a pioneer, make sure the fuse is blown. If the magazine has a fly-head look at the ground is a clean, close contact with the car chassis. Most CD-changer, the earth and live wires embedded in the CD results.

If you have a CD Changer Alpine CHA-S634with KCA-130B (Ai-NET to M-bus converter), make sure the little switch located next to the button "Delete" is set to determine the No. 2 position changer must be disconnected when the connection is in motion. Please consult your manual for details.

9) If you have a Kenwood CD changer that small link that appears next to "Delete" button on some models is the correct position for the Kenwood radio model, you need to connect. Ask yourManual for more information.
10) If the above does not resolve the situation, we only have three suspects: a faulty radio, CD drive or CD changer data itself. The only way to reign CD and CD changer lead, trying to replace one at a time. But be sure to have followed 1-9 above.

If the problem persists after all the above, please consult an expert in car audio.

Related posts:

1. Troubleshooting: CD or MP3 player on the bridge
2. Problem: In-Dash CD or MP3 Player
3. CD burning – the difference between Track-at-once and Disc-at-once
4. Blu Ray – 4 questions you might ask
5. The operation of a CD player
6. How does a CD player?
7. 10 brands sold Car Stereo
8. 2008 Kenwood DNX Series Receiver Review – Integrated Navigation with Multimedia playing
9. How does a CD work?
10. How Car Stereo Systems has developed high-tech devices are now