Troubleshooting: CD or MP3 player on the bridge
Here are the steps to follow if you are in-dash CD or MP3 player, the CD does not play or if they were stored.
1) First, make sure the discs are clean and undamaged, and included in the drive way right on the bridge. Try other CDs, especially the original CD to see if it will play. This is especially important if you are using CD-R or CD / RW (burned CDs). This problem may occur if a good CD-R is used. You can also occur as adisc is too soon to rise in an emergency or if the copier has not finalized the disc completely.
2) Use a CD cleaner disc laser. It 'available from any music store. If you played in your CD player, you will clean the laser. This will create problems with a dirty CD laser: the CD does not play or plays, but running.
3) maintain contact band / connections are not supported and that the band is to provide a good, solid contact. Whyband is removable, in time, so the contacts are dirty or worn. To find out how to get your friends to clean, you should consult your radio manual.
4) Click on "Reset" button if the radio is one, and verify proper operation. Contact your book hand radio for more information.
5) If your radio has a "reset" button, then your radio from the dash and disconnect the power connector and then back up and verify proper operation.
If the problem stillThis, in response to the above, please consult a car audio expert.